Concept illustration comparing acetate, TR90 and metal sunglass frame materials for custom OEM orders

Custom Sunglasses from China: OEM Frames, Lenses & MOQ Guide

Sunglasses are one of the few promotional products that people actually keep and wear. A branded cap gets left in a drawer; a decent pair of shades lives in the car, on the boat, at the festival, and in every photo taken there. That is why eyewear sits near the top of the list for travel brands, marine and outdoor companies, breweries, banks running summer campaigns, and distributors filling corporate gift catalogues.

It is also one of the categories where cheap sourcing goes wrong fastest. A pair that fogs, pinches, or scratches its coating off in three weeks does more damage to your brand than no gift at all. And because sunglasses touch the eye, the compliance side is not optional — a lens that claims UV protection without a test report is a liability, not a promotion.

This guide walks through what actually drives cost and quality in custom sunglasses: frame material, lens specification, decoration method, tooling, and realistic MOQs. It is written from the buyer's side of the table, with the numbers we see on real quotes from Guangzhou and Wenzhou eyewear factories.

🕶️ Why eyewear works as a promotional and private-label product

Three reasons, in order of commercial weight:

1. Perceived value is far above unit cost. A well-finished acetate or TR90 pair retails at 15–45 USD in a branded store and costs a fraction of that at FOB. As a gift-with-purchase or a corporate giveaway, it reads as a serious item, not a trinket.

2. It is a wearable billboard. Temple logos sit at eye level in every photograph. For travel, marine, golf, cycling and festival brands this is closer to apparel sponsorship than to a keychain.

3. It is a repeat-purchase, seasonal product. Private-label eyewear brands restock two to four times a year with new colourways. Once the mold and the lens spec exist, a reorder is a colour change and a purchase order.

If you are building a broader gift programme, eyewear pairs naturally with the other hard goods we cover — custom bottle openers for the bar-and-bbq angle, custom keychains for the low-cost tier, and enamel pins for the apparel-adjacent audience.

🧱 Frame material: the single biggest cost and quality decision

Almost everything a buyer complains about later — weight, hinge wobble, paint peeling, "it feels plasticky" — traces back to the frame material and the mold it came from. There are four you will be quoted on.

Material What it is Feel & durability Typical FOB (per pair) Custom-mold MOQ
Acetate (cellulose acetate) Plant-based sheet plastic, cut and tumbled, often layered Premium weight, deep gloss, ages well; heavier on the nose 6.50 – 14.00 USD 600 – 1,200 pairs
TR90 / TRX (injection nylon) Molded nylon, matte or gloss, rubberised options Light, flexible, impact resistant; the sport and promo workhorse 1.60 – 4.80 USD 300 – 600 pairs
Metal (stainless, monel, aluminium) Stamped or wire frames, plated or powder-coated Slim, dressy, aviator-friendly; plating quality is everything 2.80 – 8.00 USD 500 – 1,000 pairs
PC (polycarbonate) Injection plastic, single or two-shot colour Cheapest credible option; can feel hollow at low wall thickness 0.90 – 2.40 USD 300 – 500 pairs

Two practical notes. First, acetate is not "better" in the abstract — for a running club or a construction-industry giveaway, TR90 outperforms it on weight and impact, and costs a third as much. Match the material to the use case, not to the prestige ladder. Second, PC is where most cheap promotional eyewear lives; if your brand promise is anything above entry level, the difference in hand-feel is visible in thirty seconds of handling.

🔬 Lens specification: the part that carries your legal risk

This is where a lot of promotional orders quietly go wrong. A lens is a medical-adjacent product. Buyers in the EU place sunglasses on the market under the PPE-adjacent eyewear framework and the applicable standard for sunglasses is EN ISO 12312-1; in the US the relevant FDA requirement centres on impact resistance (the drop-ball test) and UV claims. Neither of those is satisfied by a factory saying "UV400, no problem".

What to specify and what to ask for:

  • UV claim: "UV400, 100% UVA/UVB blocking up to 400 nm" is the claim. Ask for the third-party transmission test report with the lens batch, and keep it — this is the document a customs officer or a marketplace compliance team will ask for.
  • Category / tint: CAT 1 (light), CAT 2 (general), CAT 3 (strong sun, the most common for outdoor promo), CAT 4 (not legal for driving). For a beach or ski campaign CAT 3 is the right default.
  • Polarised or not: polarised lenses cut glare off water and asphalt and add roughly 0.60–1.80 USD per pair. They are tested on a 0/90-degree axis; a mis-mounted pair shows a "rainbow" moiré against a screen. This is a standard QC check, not a premium mystery.
  • Coatings: hard-coat (anti-scratch) should be assumed on anything above the cheapest tier. Mirror, gradient and photochromic are all available and all add cost.
  • Optical quality: ask for the refractive power and prism deviation tolerance in the spec sheet. A lens that distorts will be returned regardless of how good the frame is.

If your order is going into the EU, budget for a compliance test on the finished product, not just the lens blank. It is a few hundred USD and it is the difference between a catalogue item and a recall.

🎨 Branding: five places your logo can go

Decoration is cheap per unit and it is what makes the product yours. The options, roughly in order of how often buyers use them:

  1. Temple (arm) logo. Silk-screen or pad print for flat colour, hot-stamp foil for a metallic look, laser for a tonal mark on acetate. 1–2 colours is the sweet spot; each extra colour adds a pass and a cost step.
  2. Lens corner etch or print. A small mark in the upper corner of the lens. Subtle, popular with premium brands, adds 0.25–0.60 USD per pair.
  3. Metal badge on the temple. A small die-struck plate riveted or inset into the arm. This is the single most "expensive-looking" upgrade per dollar, and it pairs well with the metalwork we describe in the custom bottle openers guide.
  4. Custom temple tips and nose pads. Coloured or dual-injection rubber. Cheap, and it makes a stock frame look bespoke.
  5. Case, pouch and cloth. A printed EVA or hard case plus a microfibre cloth with your artwork is often the cheapest way to lift perceived value. It is also a second, larger print surface — clients frequently put the campaign message here rather than on the frame.

One warning on stock artwork: send vector files (AI, EPS, or SVG). A 300 dpi PNG will print acceptably on a cloth and badly on a 6 mm temple strip.

💰 MOQ: the honest numbers

Promotional eyewear is friendlier on MOQ than most hard goods, because the factories already own hundreds of molds. That is the key distinction — stock mold vs custom mold.

Scenario MOQ per colour Tooling cost Sample lead time
Stock frame, stock colour, logo only 100 – 300 pairs none 7 – 12 days
Stock mold, custom colour (frame and/or lens) 300 – 500 pairs small colour-matching fee 12 – 18 days
Custom mold, TR90 or PC 600 – 1,500 pairs 800 – 2,500 USD 20 – 30 days
Custom mold, acetate (cut from sheet) 600 – 1,200 pairs 1,500 – 3,000 USD 25 – 35 days

Can you order 100 pairs with your own design? Yes — on a stock mold, with your logo on the temple and a printed pouch. That is the correct starting point for a first campaign or a Kickstarter-scale launch: prove the design language sells, then pay for a mold on the reorder. What you cannot realistically do is pay 300 USD for a bespoke frame and order 100 pairs; the mold amortisation alone would double your unit cost.

For context on how far down the MOQ ladder China sourcing has come in adjacent categories, see our notes on sourcing promotional products from Guangzhou.

🏭 Production, sampling and lead times

A normal custom-sunglasses order runs through six stages:

  1. Spec sheet and quote (2–3 days). Frame reference, material, lens spec, colours, decoration, packaging, target quantity.
  2. Pre-production sample (7–30 days depending on whether a mold is involved). You should receive a photo set first, then the physical pair. Approve the lens tint against a physical colour chip, not against a screen.
  3. Logo proof and position confirmation (2–4 days). Sign off on size in millimetres and position in millimetres from the hinge.
  4. Bulk production (25–40 days after sample approval and deposit).
  5. In-line and pre-shipment inspection. Do not skip this on a first order.
  6. Shipping. 5–8 days air to Europe or the US, 30–40 days by sea. Confirm the Incoterm before you compare quotes — FOB and DDP prices are not comparable numbers.

✅ Pre-shipment QC checklist

Six checks that catch almost every real defect. Ask your inspection to photograph each one:

  1. UV transmission report matches the lens batch actually used, not a generic factory certificate.
  2. Polarisation test against a screen or polarised film — every pair, not a sample, if the order is polarised.
  3. Hinge cycle test (5,000 open/close cycles on a sample of 10). Listen for the click changing and check screw retention.
  4. Coating adhesion — cross-hatch tape test on metal plating and on lens hard-coat. Peeling here predicts a customer complaint in month two.
  5. Logo rub test — 50 rubs with a dry cloth and 20 with isopropyl. If the temple print moves, it will not survive a pocket.
  6. Fit and symmetry — temple-to-temple width, temple length, and lens alignment checked against the approved sample pair, sides by side.

🤝 How Clocore works on eyewear orders

We are a Guangzhou-based sourcing partner, not a factory. For sunglasses that means we quote from several eyewear factories in Guangzhou and Wenzhou, compare their mold libraries and lens suppliers against your spec, and put a single consolidated price in front of you with the trade-offs made explicit — which material change saves money, which one costs you the return rate.

Concretely, we handle: spec translation into factory-ready Chinese documentation, sample rounds and revision loops, logo artwork preparation, third-party inspection booking, compliance test arrangement, and consolidation with your other gift items so you are not paying five separate freight bills for one campaign. If your gift programme also includes drinkware or bags, that consolidation is usually where the real savings are.

❓ FAQ

What is a realistic MOQ for my own logo on sunglasses?
100–300 pairs per colour on a stock frame. You are paying for the frame plus a print pass, not for a mold. Most first orders land at 300–500 pairs to get a better unit price.

Can I get a fully custom frame shape?
Yes, from roughly 600–1,500 pairs plus 800–3,000 USD of tooling, depending on material. Budget 20–35 days for the mold and first sample.

Is UV400 the same as certified?
No. UV400 is a performance claim; certification is a test report from a laboratory against a named standard (EN ISO 12312-1 in the EU). Always buy the report with the goods.

Why is one quote half the price of another for the same photo?
Almost always the lens and the plating. A quote with an uncoated acrylic lens and a painted metal frame will look identical in a photo and cost 40% less. Ask for the lens material, the coating stack and the plating thickness on both quotes before comparing.

Can sunglasses ship together with my other promotional items?
Yes — that is one of the main reasons to use a sourcing agent rather than four separate factories. Consolidated loading at one port, one set of export documents, one freight bill.

Planning a sunglasses order or a full gift programme?

Send us your frame reference, lens spec and target quantity — we will come back with a comparison of two or three factory options, the tooling implications, and a realistic landed cost.

Get a Quote WhatsApp Us

Clocore sources custom sunglasses and eyewear in acetate, TR90, metal and PC for travel, marine, outdoor and corporate gift programmes. Send your frame reference, lens spec and target quantity for a spec-matched quote.

Back to blog